KJW M1911 Blowback Airsoft gun

SKU:
Out of Stock
$ 199.99


Total: $220.00

Type: 6mm Plastic BB Airsoft Pistols
Manufacturer: KJWorks
Model: KP-02, KP-07, Elite A1
Materials: Metal slides & frames
Weight: 2/2.1/2 pounds
Barrel: Metal non-rifled smooth bore
Propulsion: 12 gram CO2
Action: Blowback, Single action only on KP-07 - Single/Double action on KP-02 & Elite 1A
Ammunition Type: 6mm plastic Airsoft BB's
Ammunition Capacity: 20/22/20 rounds
FPS: 366+ fps

Trigger Pull: The trigger pull on all of these KJWorks Airsoft guns is very nice in both single and double action, The KP-07's true single action only 1911 trigger is a beauty, with no take up at all and a very light and smooth release. The Beretta Elite 1A is the next best with a surprisingly light weight double action trigger. All of these guns will be shooting primarily in single action as the blowback precooks the hammer with each shot.

Accuracy: I shot all of these fine KJWorks Airsoft guns from 20 feet out in semi rested position and got very similar results. I was able to place 10 rounds in a 2 to 2.5 inch grouping for all guns, with the KP-07 1911 shooting the most well centered. The Beretta Elite 1A shot well centered also but just a hair under center mass while the KP-02 seemed to shoot low but could be adjusted to shoot higher by increasing the hopup. All three KJWorks Airsoft pistols got right around the 330-350 fps mark (5 shot average chrony testing) with the KP-7 1911 and Elite 1A Beretta hitting the higher end and the KP-02 Sig P229 getting right around 330fps. All three KJWorks Blowback Airsoft guns should be able to hit 366+fps in the right shooting conditions.

Build Quality: I was extremely impressed with the build quality of these KJWorks Airsoft guns, the fit and finish is the best I have seen on any of my guns including Airguns also. Even after shooting several magazines worth of BB's, the painted metal friction areas did not seem to show nearly as much wear as some of my other blowback guns. The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining with these KJWorks Airsoft guns.

Realism: All of these KJWorks 6mm Airsoft pistols are based on real steal versions of the same guns (KP-02 is a Sig Sauer P229 copy, the KP-07 is a Colt 1911 copy and the Elite 1A is a Beretta Copy). They are very good replicas even though the KP-02 and KP-07 do not have any specific licensing on them. The Elite 1A does have licensing which is a plus. The only negative thing I can think of is the fact that the KP-02 has the rather unusual CO2 magazine that sticks out of the bottom of the handle that is not at all like a real P229 magazine. I do believe you can find a GBB magazine that would be much more in line with the real steel version of this magazine.

Pros:

  • All metal guns with good overall realistic weights.
  • Very heavy blowback on all guns, especially the KP-07 1911
  • Excellent fit and finish - best I have seen.
  • Nice mid-range fps - great for on the field.
  • Very consistent accuracy for all KJWorks Airsoft guns.
  • Very believable replicas of the real steel versions.

Cons:

  • KP-2 and KP-07 did not have official licensing.
  • All seem to go through CO2/Gas fairly fast.
  • KP-02 had a rather strange looking CO2 magazine.
  • KP-02 slide did not lock back after last shot, may be due to CO2 magazine configuration.

Comments: I guess you get what you pay for, these KJWorks Airsoft guns do fetch a bit higher price but when you take them out of the box and really look at them closely you can see why, they are pretty much flawless and the fit and tolerances are very good with very little play in the mechanical parts. Shooting these guns is just as wonderful, they all worked very well and got consistent accuracy and fps between shots. There were no ammo loading problems and no unexpected behaviors with any of these Airsoft pistols. If you can afford to pay that little bit more for one of these very high quality KJWorks Blowback Airsoft guns, you will not be let down!

Buy the Magazine: KJ1068

SpecificationValueValueValue
Caliber:6 mm (.24 cal)6 mm (.24 cal)6 mm (.24 cal)
Action:Semi-AutomaticSemi-AutomaticSemi-Automatic
FPS:350 to 400350 to 400350 to 400
Ammo Type:AirsoftAirsoftAirsoft
Trigger Action:DoubleDoubleDouble
Body Type:191119111911
Blowback Action:BlowbackBlowbackBlowback
GunFrontSight:Blade and RampBlade and RampBlade and Ramp
GunRearSight:FixedFixedFixed
Material:Full MetalFull MetalFull Metal
Magazine Capacity:262626
Options:Black - Co2Black - Green GasOlive Drab - Co2

Have you used this product?
Rate it now.

KJWorks Full Metal CO2 Airsoft 1911 Table Top Review

KJWorks Full Metal CO2 Airsoft 1911 Table Top Review

(522 raters) 57139 views - 8/8/2015 4:01:54 PM
Checkout my written Table Top Review with additional photos over on the ReplicaAirguns.com Website:
http://www.replicaairguns.com/posts/2015/8/7/kjworks-full-metal-co2-airsoft-1911-table-top-review.html

KJWorks CO2 Airsoft Full Metal 1911
-Full Metal Design.
-2.2 Pounds (980 grams).
-Adjustable Hop-up.
-350-400 fps
-28 Round CO2 Magazine
-Blowback SAO
-https://www.replicaairguns.ca/kj-works-m1911-full-metal-blowback-olive-co2-airsoft-pistol

I am a big fan of 1911 pistols and love getting my hands on pretty much any version weather it be a Real Steel 45 caliber 1911, a 4.5mm Steel BB version or 6mm Airsoft Pistol. As long as it has that true 1911 single action short light trigger to it. I love the way the slide cycles a bit slower than most semi auto pistols and this can be found in many Airgun and Airsoft version like this KJWorks 1911 making the shooting experience even more realistic. The fit, Finish and overall quality of the KJWorks 1911 over other brands is worth the slight additional costs so if you don't mind paying juts a tad bit more for that extra quality and you're looking for a CO2 1911 then you will not be disappointed with the KJWorks Full Metal CO2 Airsoft 1911.

Buy the Airsoft KJWorks 1911 in our Canada Replica Airguns Store:
https://www.replicaairguns.ca/kj-works-m1911-full-metal-blowback-olive-co2-airsoft-pistol

Buy KJWorks Airsoft Pistols in the Canada Replica Airguns Store:
https://www.replicaairguns.ca/kj-works
First Person Shooting Clay Pigeons with KJWorks M9A1 and 1911

First Person Shooting Clay Pigeons with KJWorks M9A1 and 1911

(309 raters) 23210 views - 8/13/2015 5:26:18 PM
Buy KJWorks Airsoft Pistols in the Canada Replica Airguns Store:
https://www.replicaairguns.ca/kj-works

This First Person Shooting Clay Pigeons Video with my KJWorks M9A1 and 1911 Airsoft pistol is to serve two purposes: Number one and really the only reason needed to make a video like this... To get outside on a nice warm summer day and practice some tactile shooting all while recording it in first person so you can come along and enjoy it with me :)

Secondly I wanted to inform everyone that the video uploads will be a bit lighter for the next week or so since I am on what I call a working holiday. I am focusing on a Fitness Contest this weekend along with a Fitness Expo the following weekend, nothing to do with Replica Airguns but it does coincide with my other Website and YouTube channel GetFitOver40.com. The Fitness contest is the Victoria Cup where I will be competing in the Men's Physique (Masters - Over 40) and (Open - All Ages) divisions. The Fitness Expo is called "theFitExpo" and it is in Anaheim California.

So if you want to watch more of my videos then you will have to checkout my other fitness channel for the next week where I will be posting lots of related content on what's going on fitness wise in my life right now. (http://www.GetFitOver40.com)

So I made a quick demo preview video where I get away from my table top and go outside to show them off a bit and shoot a few rounds through them at some clay pigeons. I did have some camera issues but you will get a good idea on how these guns look and perform.

KJWorks CO2 Airsoft Full Metal 1911
-Full Metal Design.
-2.2 Pounds (980 grams).
-Adjustable Hop-up.
-350-400 fps
-28 Round CO2 Magazine
-Blowback SAO
--https://www.replicaairguns.ca/kj-works-m1911-full-metal-blowback-olive-co2-airsoft-pistol

KJWorks CO2 Airsoft Full Metal M9A1
-Full Metal Design.
-2.1 Pounds (950 grams).
-Adjustable Hop-up.
-350-400 fps
-24 Round CO2 Magazine
-Blowback SA & DA
-https://www.replicaairguns.ca/kj-works-m9a1-full-metal-blowback-co2-airsoft-pistol

How are we doing? Give us feedback about this page.