www.replicaairguns.com Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Model: Edge SA-X01 Materials: Mostly metal/aluminum. Weight: 5.52 pounds ( 2.50 kg). Total Length: 23.5-27 inches (597-686mm). Barrel: 10.63 inch (270) inner 6.03mm tight bore barrel non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 380 round magazines. FPS: 380 fps with installed spring, included M90 spring will be lower fps. Overall I am impressed with the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I would have liked to have seen it shoot a bit closer to the bullseye out of the box using the iron sights, but personally I would more than likely add a red dot sight anyway, and that will correct any sighting problems one may have with this Airlift Rifle. The FPS is I would say about perfect for most Airsoft shooting conditions and it can be used with the pre-installed spring either for CQB or out door games. I do like the 120 round magazines as there is no need to whined a spring half way through a magazine but you will need more magazines on hand or a good speed loader handy for an Airsoft Battle. Just keep in mind your battery options will be limited due to the battery area being rather small since this very compact AIrsoft Rifle does have limited space to put a battery. Read my full written review here: www.replicaairguns.com/posts/2024/7/4/specna-arms-edge-sa-x01-aeg-airsoft-rifle-field-test-review Buy the Specna Arms Edge SA-X01 AEG Airsoft Rifle in Canada: https://www.replicaairguns.ca/sa-x01-edge-20-submachine-gun Buy the Specna Arms Airsoft Guns in the US: https://www.replicaairguns.us/specna-arms