Videos 29 - 38 of 1222 Videos

Specna Arms Core SA-J73 AEG Airsoft Rifle Field Test Review

www.replicaairguns.com Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Model: Core SA-J73 Materials: Fiberglass reenforced plastic and metal/aluminum. Weight: 5.7 pounds (2.59 kg). Total Length: 23.4 - 32.6 inches (594 - 828mm). Barrel: 15.7 inch (399mm) inner 6.03mm tight bore barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 430 round magazine. FPS: 370-380 fps with installed spring, included M90 spring will be lower fps. Overall I am super impressed with the Specna Arms Core SA-J73 AEG Airsoft Rifle! At around $200 Canadian you get a well made decent quality AEG Airsoft Rifle that not only looks and feels really good, but performs as good if not better than some much more expensive AEG Airsoft Rifles out there. All you really need to get on top of this purchase would be a decent charger and battery setup along with some quality Airsoft BB’s and then you are ready to go. No need for any more upgrades at least not right away. So if you are looking for an affordable AK type AEG Airsoft Rifle with no real compromises to speak of, look no further than the Specna Arms Core SA-J73 AEG Airsoft Rifle. Not much else will be a better option in this price range. Read my full written review here: www.replicaairguns.com/posts/2024/7/10/specna-arms-core-sa-j73-aeg-airsoft-rifle-field-test-review Buy the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle in Canada: https://www.replicaairguns.ca/sa-j73-core-ak-airsoft-rifle Buy the Specna Arms Airsoft Guns in the US: https://www.replicaairguns.us/specna-arms

Specna Arms Edge SA-X01 AEG Airsoft Rifle Field Test Review

www.replicaairguns.com Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Model: Edge SA-X01 Materials: Mostly metal/aluminum. Weight: 5.52 pounds ( 2.50 kg). Total Length: 23.5-27 inches (597-686mm). Barrel: 10.63 inch (270) inner 6.03mm tight bore barrel non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 380 round magazines. FPS: 380 fps with installed spring, included M90 spring will be lower fps. Overall I am impressed with the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I would have liked to have seen it shoot a bit closer to the bullseye out of the box using the iron sights, but personally I would more than likely add a red dot sight anyway, and that will correct any sighting problems one may have with this Airlift Rifle. The FPS is I would say about perfect for most Airsoft shooting conditions and it can be used with the pre-installed spring either for CQB or out door games. I do like the 120 round magazines as there is no need to whined a spring half way through a magazine but you will need more magazines on hand or a good speed loader handy for an Airsoft Battle. Just keep in mind your battery options will be limited due to the battery area being rather small since this very compact AIrsoft Rifle does have limited space to put a battery. Read my full written review here: www.replicaairguns.com/posts/2024/7/4/specna-arms-edge-sa-x01-aeg-airsoft-rifle-field-test-review Buy the Specna Arms Edge SA-X01 AEG Airsoft Rifle in Canada: https://www.replicaairguns.ca/sa-x01-edge-20-submachine-gun Buy the Specna Arms Airsoft Guns in the US: https://www.replicaairguns.us/specna-arms

Specna Arms Edge SA-X01 AEG Airsoft Rifle Table Top Review

www.replicaairguns.com Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Model: Edge SA-X01 Materials: Mostly metal/aluminum. Weight: 5.52 pounds ( 2.50 kg). Total Length: 23.5-27 inches (597-686mm). Barrel: 10.63 inch (270) inner 6.03mm tight bore barrel non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 380 round magazines. FPS: 380 fps with installed spring, included M90 spring will be lower fps. I for sure like the look of the Specna Arms Edge SA-X01 AEG Airsoft Rifle, but more than that you get a really great Compact PDW Airsoft Rifle at a reasonable price with a ton of quality components and a mostly all metal build. Specna Arms even includes an additional magazine in the box. You could go with one of their Core series of Airsoft Rifles in a similar PDW and save a bit of money but if you can afford the upgrade then I would go for this version as you will not need to upgrade it in the future and that alone will save you some money over time. I would suggest adding a couple Lipo batters and a good charger to your shopping cart and maybe even an couple more magazines. Read my full written review here: www.replicaairguns.com/posts/2024/8/21/umarex-elite-force-m4-cfrx-eye-trace-aeg-airsoft-rifle-table-top-review Buy the Specna Arms Edge SA-X01 AEG Airsoft Rifle in Canada: https://www.replicaairguns.ca/sa-x01-edge-20-submachine-gun Buy the Specna Arms Airsoft Guns in the US: https://www.replicaairguns.us/specna-arms

Specna Arms Core SA-J73 AEG Airsoft Rifle Table Top Review

www.replicaairguns.com Type: AEG Airsoft Rifles Manufacturer: Specna Arms. Model: Core SA-J73 Materials: Fiberglass reenforced plastic and metal/aluminum. Weight: 5.7 pounds (2.59 kg). Total Length: 23.4 - 32.6 inches (594 - 828mm). Barrel: 15.7 inch (399mm) inner 6.03mm tight bore barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 430 round magazine. FPS: 370-380 fps with installed spring, included M90 spring will be lower fps. The Specna Arms Core SA-J73 AEG Airsoft Rifle for right around $200 is not what I would expect for such a lower priced more entry level Airsoft Rifle. The build quality and components in this Airsoft Rifle are not budget by any means and when you hold it, it feels like a very high quality product. Sure you don’t get a battery or charger with it which you often find bundled with lower cost Airsoft Rifles, but generally these batteries and chargers are extremely entry level and will require upgrading almost immediately. So do yourself a favor and invest in a good battery setup if you do not already have one. If you’re in the market for an AK based AEG Airsoft Rifle and have a limited budget but still want a decent product, then I would recommend the Specna Arms Core SA-J73 AEG Airsoft Rifle for sure. Read my full written review here: www.replicaairguns.com/posts/2024/6/27/specna-arms-core-sa-j73-aeg-airsoft-rifle-table-top-review Buy the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle in Canada: https://www.replicaairguns.ca/sa-j73-core-ak-airsoft-rifle Buy the Specna Arms Airsoft Guns in the US: https://www.replicaairguns.us/specna-arms

John Wayne Marshal CO2 BB Revolver Field Test Review

www.replicaairguns.com Type: BB Pistol. Manufacturer: Distributed by AirVenturi. Model: John Wayne Marshal. Materials: Mostly plastic, some internal metal parts. Weight: 1 pound (455 grams). Total Length: 10.5 inches (26.6cm). Barrel: 5.55 inches 14cm) metal non-rifled. Propulsion: CO2. Action: Revolver SAO. Ammunition Type: 4.5mm Steel BB’s. Ammunition Capacity: 18 round internal magazine. FPS: Claimed 420. The John Wayne Marshal CO2 BB Revolver is a lower cost mostly plastic Single Action Army Revolver with a fair amount of plastic in the build, but it does feel fairly well built and fairly solid other than being a bit lighter weight. It should produce close to 400 fps velocities in warmer conditions which is more than enough for plinking and pop can shooting which is really what it is built for. I do have to mention that this John Wayne Marshal CO2 BB Revolver for whatever reason is double the price of the Crosman Fortify CO2 BB Revolver I reviewed earlier, so if you don’t care about the John Wayne Licensing, than maybe consider the Crosman version for a lower priced option. Read my full written review here: www.replicaairguns.com/posts/2024/6/21/john-wayne-marshal-co2-bb-revolver-field-test-review Buy the John Wayne Marshal CO2 BB Revolver in Canada: https://www.replicaairguns.ca/marshal-co2-bb-revolver Buy the John Wayne Marshal CO2 BB Revolver in the US: https://www.replicaairguns.us/marshal-co2-bb-revolver

Gamo GP-20 Combat CO2 BB Pistol Field Test Review

www.replicaairguns.com Type: NBB CO2 BB Pistol. Manufacturer: Distributed by Gamo. Model: P-20. Materials: Plastic & metal. Weight: .97 pounds (439 grams). Total Length: 7.25 inches (184mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto NBB, double action only trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 20 round metal stick magazine. FPS: Claimed 400. The Gamo GP-20 Combat CO2 BB Pistol is like many of these low cost CO2 NBB BB Pistols, was very predictable as I have shot a ton of them and since they all share similar mechanical attributes internally, they tend to shoot about the same. I don’t mean this as a bad thing since they generally all shoot fairly decent with right around 400 fps velocities and generally I get anywhere from a 2 inch to 4 inch grouping with them. The good parts is the design is tried and trued and seems to be very durable and problem free with less moving parts to go wrong. They are also rather low cost and the magazines are interchangeable, so if you have other models based on this same build design, then you can mix and mach your magazines and load them all up for non-stop shooting fun. I do like the overall feel of this NBB CO2 BB Pistol, and the sights are very easy to aim with being white dot in the front and fiber optic in the back. If you are looking for a low cost basic NBB CO2 BB Shooter then this could just check all those boxes for you. Read my full written review here: www.replicaairguns.com/posts/2024/6/20/gamo-gp-20-combat-co2-bb-pistol-field-test-review Buy the Gamo GP-20 Combat CO2 BB Pistol in Canada: https://www.replicaairguns.ca/gp-20-combat-co2-bb-gun Buy the Gamo GP-20 Combat CO2 BB Pistol in the US: https://www.replicaairguns.us/gp-20-combat-co2-bb-gun

John Wayne Marshal CO2 BB Revolver Table Top Review

www.replicaairguns.com Type: BB Pistol. Manufacturer: Distributed by AirVenturi. Model: John Wayne Marshal. Materials: Mostly plastic, some internal metal parts. Weight: 1 pound (455 grams). Total Length: 10.5 inches (26.6cm). Barrel: 5.55 inches 14cm) metal non-rifled. Propulsion: CO2. Action: Revolver SAO. Ammunition Type: 4.5mm Steel BB’s. Ammunition Capacity: 18 round internal magazine. FPS: Claimed 420. The John Wayne Marshal CO2 BB Revolver is for sure an option if you are looking for an old west single action cowboy BB shooter and specifically if you are a John Wayne fan. If you don't care about the John Wayne licensing and want to save about half of the price then my recommendation is to go for the Crosman Fortify as it is the same exact CO2 BB Revolver at the end of the day minus the john Wayne licensing on it. You also have the option of buying one of the many Shell Loading Single Action Army Revolvers available but they are a bit more money and will shoot a little slower with less ammo capacity but the trade of is a lot more realism. Read my full written review here: www.replicaairguns.com/posts/2024/6/14/john-wayne-marshal-co2-bb-revolver-table-top-review Buy the John Wayne Marshal CO2 BB Revolver in Canada: https://www.replicaairguns.ca/marshal-co2-bb-revolver Buy the John Wayne Marshal CO2 BB Revolver in the US: https://www.replicaairguns.us/marshal-co2-bb-revolver

Gamo GP-20 Combat CO2 BB Pistol Table Top Review

www.replicaairguns.com Type: NBB CO2 BB Pistol. Manufacturer: Distributed by Gamo. Model: P-20. Materials: Plastic & metal. Weight: .97 pounds (439 grams). Total Length: 7.25 inches (184mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto NBB, double action only trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 20 round metal stick magazine. FPS: Claimed 400. I have reviewed many CO2 BB Pistols built exactly like the Gamo GP-20 Combat CO2 BB Pistol, so it is at least for me, not the most exciting Airgun review but I always enjoy the chance to shoot even the most basic of Airguns. I would say the Gamo GP-20 Combat CO2 BB Pistol in this category is one of the nicer options as I feel Gamo stepped up the build quality just a bit, even if it was just to make the grips feel more solid and less prone to popping off when loading CO2. It is a little bit beefier than similar CO2 BB Pistols in this category so maybe not the best for smaller handed individuals but good for someone like me with larger mitts. The price is right for sure and with its simple design, it should perform as expected for a good long time! Read my full written review here: www.replicaairguns.com/posts/2024/6/13/gamo-gp-20-combat-co2-bb-pistol-table-top-review Buy the Gamo GP-20 Combat CO2 BB Pistol in Canada: https://www.replicaairguns.ca/gp-20-combat-co2-bb-gun Buy the Gamo GP-20 Combat CO2 BB Pistol in the US: https://www.replicaairguns.us/gp-20-combat-co2-bb-gun

Replica Airguns June Mystery Box Unboxing

www.ReplicaAirguns.com Another Unboxing Update Video taking a look at two Rifles and two Revolvers. A shell loading CO2 dual ammo 1875 single action Remington branded Revolver from Crosman, an 1858 single action CO2 BB Revolver from Barra, another Barra product kind of like a Red Ryder BB Riffle but in dual ammo version with a much different loading system called the Barra 1866, and lastly a Cybergun CO2 Airsoft MP40 with a very different magazine setup than I have seen before. Crosman - Remington CO2 BB/Pellet 1875 Revolver: https://www.replicaairguns.ca/remington-1875-bb177-revolver Barra CO2 BB 1858 Single Action Revolver: https://www.replicaairguns.ca/the-1858-co2-bb-gun Barra Lever Action BB/Pellet 1866 Junior Rifle: https://www.replicaairguns.ca/barra-1866-the-junior-kit-pellet-rifle Cybergun MP40 CO2 Blowback Airsoft Rifle: https://www.replicaairguns.ca/cybergun-mp40-co2-blowback-airsoft-rifle

Barra 1866 Junior Dual Ammo Pump Cowboy Rifle Field Test Review

www.replicaairguns.com Type: Lever/Pump Dual Ammo Rifle Manufacturer: Distributed by Barra. Model: Junior Dual Ammo Pump Cowboy Rifle. Materials: Mostly plastic, some metal. Weight: 4.1 pounds (1859 grams). Total Length: 36 inches (91.44mm). Barrel: 18 inches (45.7cm) metal rifled. Propulsion: Pump Compressed Air. Action: Lever/Pump Ammunition Type: .4.5mm steel BB’s & .177 Caliber Pellets. Ammunition Capacity: 50 BB’s in hopper, single shot Pellets. FPS: Claimed 350-400. The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle really surprised me in how it performed, It’s not going to be the most powerful BB/pellet cowboy rifle out there but compared to a Red Ryder it does have a bit more punch and in terms of accuracy I found it shot better for me than at least I can do with a Red Ryder type BB rifle. You also have the option of shooting BB’s or Pellets but I would recommend shooting BB’s since you have that 50 round hopper and the BB’s auto load when you pull the bolt back which is much easier than loading pellets with a pair of tweezers which is what I needed to do to get them in with my sausage fingers. One more thing to mention is I do not recommend pumping this air rifle more than 1 time, not only does the manual say not to, but there is little benefit in pumping it more times with only the risk to damaging the airgun. I pumped it 4 times and only got about 20 fps more out of it so just don’t do it. If you want a Cowboy style Air Rifle with a little more realism than say a Red Ryder but that shoots about the same then checkout the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle. Read my full written review here: www.replicaairguns.com/posts/2024/5/31/barra-1866-junior-dual-ammo-pump-cowboy-rifle-field-test-review Buy the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle in Canada: https://www.replicaairguns.ca/barra-1866-the-junior-kit-pellet-rifle Buy the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle in the US: https://www.replicaairguns.us/barra-1866-the-junior-kit-pellet-rifle